With the ground optical fiber cable, power equipment and products professional manufacturers

OUR PRODUCTS

Contact Us

Address: Room 201,Building No. 1,No. 38 Tanan Road,Yuhua District,Shijiazhuang City,Hebei Province,China.
Phone: +86-311-89943585

Armor Rods

Armor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or with angles.
  • /images/up_images/201652805744.jpg
  • /images/up_images/201652805749.jpg

Production
Armor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or with angles. They protect conductors for line angles up to 30°. Armor Rods fit tightly with the suspension and prevent bending of the conductors.
Damage of overhead conductors depends upon line design, exposure to wind flow, tension and vibration which create mechanical strains through each strand.
Attachment and suspension points of heavy fittings are the first to be damaged because of mechanical strains concentration. The application of an armor rod should decrease the strains and slightly extend the life of the conductor, particularly where the conductor endures severe conditions.

Material
These products are made from aluminium alloy.

Note
Lay direction of the armor rod must be the same as that of the outer stranding of the conductor to which it is applied.
ORDERING INFORMATION
When ordering,please specify:
-conductor type, stranding, outside diameter and lay direction

For AAC/AAAC/ACSR/ACAR 



Selection chart

Model Suitable wire  (GB/T 1179-1983) Clamp length(mm) Diameter (mm) Clamp weight(kg)
Model Outside Diameter(mm)
HL-95/15 LGJ-95/15 13.61 1400 3.5 0.7
HL-95/20 LGJ-95/20 13.87 1400 3.5 0.7
HL-95/55 LGJ-95/55 16.00 1500 3.5 1.0
HL-120/7 LGJ-120/7 14.50 1400 3.5 0.7
HL-120/20 LGJ-120/20 15.07 1400 3.5 0.7
HL-120/25 LGJ-120/25 15.74 1400 3.5 0.7
HL-120/70 LGJ-120/70 18.00 1800 4.5 1.3
HL-150/8 LGJ-150/8 16.00 1500 3.5 1.0
HL-150/20 LGJ-150/20 16.67 1.0
HL-150/25 LGJ-150/25 17.10 1.0
HL-150/35 LGJ-150/35 17.50 1.2
HL-185/10 LGJ-185/10 18.00 1800 5.0 1.3
1.4
1.4
1.4
HL-185/25 LGJ-185/25 18.90
HL-185/30 LGJ-185/30 18.88
HL-185/45 LGJ-185/45 19.60
HL-210/10 LGJ-210/10 19.00 1800 5.0 1.5
2.0
2.0
2.0
HL-210/25 LGJ-210/25 19.98
HL-210/35 LGJ-210/35 20.38
HL-210/50 LGJ-210/50 20.86
HL-240/30 LGJ-240/30 21.60 1900 5.0 2.2
HL-240/40 LGJ-240/40 21.66
HL-240/55 LGJ-240/55 22.40
HL-300/15 LGJ-300/15 23.01 2000 6.0 2.2
2.5
2.7
2.7
2.7
2.7
HL-300/20 LGJ-300/20 23.43
HL-300/25 LGJ-300/25 23.76
HL-300/40 LGJ-300/40 23.94
HL-300/50 LGJ-300/50 24.26
HL-300/70 LGJ-300/70 25.20
HL-400/20 LGJ-400/20 26.91 2200 6.0 4.2
4.2
4.2
4.2
4.7
4.8
HL-400/25 LGJ-400/25 26.64
HL-400/35 LGJ-400/35 26.82
HL-400/50 LGJ-400/50 27.63
HL-400/65 LGJ-400/65 28.00
HL-400/95 LGJ-400/95 29.14
HL-500/35 LGJ-500/35 30.00 2500 6.0 5.2
HL-500/45 LGJ-500/45 30.00
HL-500/65 LGJ-500/65 30.96
HL-630/45 LGJ-630/45 33.60 2500 7.9 6.8
HL-630/55 LGJ-630/55 34.32
HL-630/80 LGJ-630/80 34.82
HL-800/55 LGJ-800/55 38.40 2500 7.9 6.8
HL-800/70 LGJ-800/70 38.58
HL-800/100 LGJ-800/100 38.98

Note: The meaning of the letters and numbers in the model no.: H-Armor Rod;L-spiral preformed;after“-”is the suitable wire type.

Send your message to us
(* We will reply your inquiry to this Email as soon as we see it.)
Product:
Name: *
E-mail: *
Tel:
Message: *
Verification Code: * 图片看不清?点击重新得到验证码
Other Products
Copyright © Shijiazhuang Paerpu Import and Export Trading Co.,Ltd. All Rights Reserved
Hot products:Preformed Armor Rods Forming Machine | Hydraulic Bending Machine | Dead-End Clamp For ADSS (ANZ) | Extension Link | Ground Preformed Strain Clamp | Side Ties |